You need
– 6 cone spikes
– A pair of leather/ suede heels (these are Tony Bianco ‘Karr‘)
– Dart Awl hole making tool (makes life way easier!)
– A screwdriver
or buy a complete studding kit here.
How to
1. Look at the seam at the back of your heels and mark with pencil where you want the spikes to sit. You want the spikes to sit apart so that there isn’t too much strain on the seam.
2. Using your hole making tool, push through the seam and wiggle to create a hole.
3. Push the screw through the hole, using a screwdriver to twist if it is difficult to get through.
4. Attach your spikes to the screw by twisting.
5. Use the screwdriver to tightly screw the studs on. Make sure the screws are flush with the leather so your the back of your heels don’t get irritated.
Voila, all done! Simple right?
